Effective Tips To Make Your Water Pump Run More Efficiently

Posted on September 08, 2015



Quite a number of people depend on petrol water pumps to move water from one point to another. If you do or are thinking of getting one, an important consideration you need to make is how to ensure that the pump is as efficient as possible. Running such a pump in an inefficient manner has the potential to either damaging it within a short time, increasing the cost of using the unit or not gaining much benefit from it. Fortunately, the things you need to do to keep it running smoothly are usually very straightforward and include:

Make sure the plumbing to the pump is in good order

You will need to have a pipe running from the water source to the pump. This can be the source of numerous problems if you are not careful with the way you deal with it. For instance, older pumps are usually designed such that if they suck too much air, they might end up malfunctioning. This means that when you are setting up such a pump, you would need to eliminate any source of air leaking into the inlet pipe. Some of the measures you can take include ensuring that all the piping is tight fitting, and using devices such as washer to seal such joints.

Using it in the correct environment

Before buying a pump, it’s wise to take into account the type of environment you will be using it in, and then making sure that it’s optimized for this. For instance, there are some water pumps that are easily damaged if they are exposed to too much water, such as from rain. Such pumps are ideal for indoor use. If you intend to use one in the outdoors, you would either need to make sure that they are designed for use in the outdoors, or build a shelter for them.

Don’t use it at maximum capacity all the time

The most ideal way to use a water pump is at subnormal capacity. Rather than using it at 100% capacity throughout, it would be wise for you to use it at around 90% capacity since this will result in less wear on the device. This means that by the time you go shopping for one, you should have calculated just how much power you need from the pump, and then get one that can supply just a little over this. This way, you will not be paying too much for power you will not use anyway, and you will also not strain the pump too much. This is particularly important if you intend to use the pump constantly.

By simply following the above pointers, you will be in a good position to maintain your pump in good condition for a long time. To ensure that you get it done correctly, you should always consult a pump specialist for more advice on how to choose the best one to suit your needs. Even if you have information about the ideal technical features you need the pump to have, having the input of a professional will always come in handy.


This entry was posted in Uncategorized | .

2 thoughts on “Effective Tips To Make Your Water Pump Run More Efficiently”

  1. It’s interesting that you point out how important it is to consider the environment the pump will be in. It makes sense to consider the environment because you’ll need to know if there are any special accommodations that will need to be made. Writing down your needs and comparing them with the pumps available may help you decide which pump is right for you.

  2. I was watching a neighbor get a water pump system be installed in their home the other day. It was interesting to watch its installation and I wanted to learn a little bit more about it. YOur advice to not use maximum capacity all the time is important.

Leave a Reply

Your email address will not be published. Required fields are marked *